Hello Together :-) my name is Marco and I am from Germany. Like better late than never I finally also bought a Mesu 200mk2 . After 11month of waiting due to motor delivery problems I picked it up at Lucas place last Saturday! So far everything works great and I am really happy … but how else should it be the more deeper I check all those Sitech Exe settings the more question marks appear in my head …
It is hopefully ok if I ask some questions here :-)
1 - Which type of Mount you guys set under Config>Mount Parms ? Equatorial or GEM ?
2 - do you also can hear some sound / Mount noise differences while slewing ?
3 - anybody using a bent pillar ? How can I manage that I have no meridian Flip and the tracking do not stop at meridian?
4 - how to set up a home position after unparking ? Which is the right Sitech exe tool ? Until now no homing switches !
5- Two behaviors changed during testing. After set a park position :
first I unpark the scope / scope stays
than I slew to an object via Nina
automatically tracking startet after object coordinates were reached ..
stop tracking , press park scope > Mount go to park position.
every time same … I played it in a “loop”
now :
as soon as I Press the unpark button the Mount starts slewing to a wierd position ??? Stop and park is still working … also slewing to another object in between .. but if I start from park position and press unpark …
6-
second : during the last testing days slewing to an object was every time acceleration - slewing at full slew speed - slowing down close to final position.
Today - acceleration to about half slew speed - after about 30deg it goes to full slew speed - 30deg before reaching the final position it goes back to half slew speed .
any ideas ? Do you had some similar behaviors or experiences ?
fyi I am still testing insight and have no proper alignment ready ..
i really looking forward to maybe get some thoughts and answers from your side ! Would really appreciate! Thank you very much ! Best regards Marco
