This mount has been working flawlessly for over two years. A few nights ago I targeted M51 and when I hit enter I got this message. I am using a StarSense. The GOTO works well on everything else except this area in the North East.IMG_2496 (1)x.jpg Any ideas or suggestions?
Celestron CGX
https://www.cloudynights.com/topic/643425-filter-limits
I think this will solve your problem.
Thank you so much. I knew there were "mystic" things about this mount but I never saw them! I don't know what I did to cause this but I will try this tonight. Once again, Astrobin is my savior!
Patrick Stevenson:https://www.cloudynights.com/topic/643425-filter-limits
I think this will solve your problem.
Thank you so much. I knew there were "mystic" things about this mount but I never saw them! I don't know what I did to cause this but I will try this tonight. Once again, Astrobin is my savior!
Just wanted to thank you again for the guidance. Turns out that Celestron did not include the Filter section in the CGX manual but it is in the AVX manual. Never would have known this without your help. This is one reason I have been a member of Astrobin for years. It offers so much more than just a place to post images! This is one I just finished a few days ago that was a real surprise coming from a 10" f/4 Newt. I'm really proud of this one and thought I'd share NGC3242, Ghost of Jupitor.
Respectful Engaging Supportive
ASI Air problems when pointing due north, but not when point ing due south.
So I have my Telescope setup on my balcony. I can see about half of the nightsky from east to west. yesterday I took the whole setup, without dissasembling it, down to a different spot to photograph the heart nebula. I did the whole polar aligning ro...
Directional GOTO issues in specific sky regions similar to your northeast problem.
Scope now slewing sometimes when starting an imagine session
Having a weird issue where at the beginning of my imaging session sometimes when I use Nina to do framing or to start a sequence, where my mount won't slew. It says it is slewing but it doesn't. I have tried disconnecting / closing NINA and r...
Mount slewing problems during imaging sessions may relate to your GOTO failure.