AstroBin is the home of astrophotography - Share full resolution images, preserve acquisition details, discover equipment, discuss techniques, and learn from the community.Discover AstroBin

First Mono Camera: IMX492?

7 replies117 views
Jeffrey Kinsey avatar

So I see that there are lots of IMX492 Mono sensor users out there, but a serious dearth of reviews about them. I understand that they have some amp glow, but no real info on how difficult it is to deal with. Are there any other cons?

Well written Respectful Engaging
Tony Gondola avatar
Rafał Szwejkowski avatar

Get an IMX571 camera in 2026.

John Stone avatar

Or an IMX585 if you want to go smaller/cheaper.


The best on the market is the QHY version which comes with camera, filters, OAG (everything you need) for less than the cheapest IMX571

Helpful
Tobiasz avatar

Jeffrey Kinsey · Jul 13, 2026, 12:31 AM

So I see that there are lots of IMX492 Mono sensor users out there, but a serious dearth of reviews about them. I understand that they have some amp glow, but no real info on how difficult it is to deal with. Are there any other cons?

Well, it's just amp glow. If you shoot proper darks and flat darks your calibration will be fine. There is no real info on it on the internet because it is not a complex topic.

Together with the IMX585 the IMX492 is one of the highest QE sensors you can get on the market. Technically with its hardware BIN1 and BIN2 mode, you get 2 sensors in one.

It is a good sensor, especially second hand.

Well written Helpful Concise
andrea tasselli avatar

Jeffrey Kinsey · Jul 13, 2026, 12:31 AM

So I see that there are lots of IMX492 Mono sensor users out there, but a serious dearth of reviews about them. I understand that they have some amp glow, but no real info on how difficult it is to deal with. Are there any other cons?

Look no further: ASI294MM

Jeffrey Kinsey avatar

Tobiasz · Jul 13, 2026, 06:23 AM

Well, it's just amp glow. If you shoot proper darks and flat darks your calibration will be fine. There is no real info on it on the internet because it is not a complex topic.

Together with the IMX585 the IMX492 is one of the highest QE sensors you can get on the market. Technically with its hardware BIN1 and BIN2 mode, you get 2 sensors in one.

It is a good sensor, especially second hand.

Thank you for your response. I’m pretty new to this hobby and this is really helpful.

I bought the ASI585MC AIR as my first camera, so I haven’t had to deal with darks at all.

Well written Respectful
Jeffrey Kinsey avatar

John Stone · Jul 13, 2026, 03:48 AM

Or an IMX585 if you want to go smaller/cheaper.


The best on the market is the QHY version which comes with camera, filters, OAG (everything you need) for less than the cheapest IMX571

I own a IMX585 OSC and love it.

That MINICAM8 is very tempting; I’m just looking for a larger FOV. I figure once I buy the filter wheel and filters for a larger sensor they will work on smaller cameras too.