Hi i have two 2600mmpro. I have some issues with one of them because I can’t reach the temperature I’m waiting for. It gets stuck along the way, even with the cooler at 100%. Example: with 20º in my backyard is not possible reach to -10 and if i want to -5º the cooler gets high to 85 or 90%. Is there any problem with the camera? maybe the fan?
2600 MMPRO COOLING TEMPERATURE ISSUE
I wouldn’t hurt to open it up and have a look.
I had a similar problem. Check and make sure your fan is running. Mine stopped and overheated my camera to the point it damaged the CMOS chip.
Well Written Concise
Verify correct voltage at the plug for the camera in question…
Hi. thanks for your response. The power is a zwo 12 dc adapter only for the camera. The fan is working but i don´t know if the speed´s correct