Managed to get a nice used QHY268 M, but am experiencing some unexpected behavior.
It seems that it can not stay stable at the set temperature. The ambient temp is around 20c and i have it set to cool to -5c
What i am seeing is that it consistently stays around -4.9c with cooler power at around 62% from time to time it will hit the requested -5c but it will not stay there.
The camera is powered via UPBv2 and is getting 12v power. The firmware is the latest. I use NINA to control the camera
Any thoughts on what might be causing this or fixes would be more than welcome?
CS,
Sean
It seems that it can not stay stable at the set temperature. The ambient temp is around 20c and i have it set to cool to -5c
What i am seeing is that it consistently stays around -4.9c with cooler power at around 62% from time to time it will hit the requested -5c but it will not stay there.
The camera is powered via UPBv2 and is getting 12v power. The firmware is the latest. I use NINA to control the camera
Any thoughts on what might be causing this or fixes would be more than welcome?
CS,
Sean