Is anyone using the redcat 51 with a 585mc sensor using a zwo Eaf with the pro Astro gear Eaf holder , if so so what step size are you using for autofocus?.
Dave
Dave
Redcat autofocus step size
I have an RC51 with a 183 MC camera. I left the EAF at default values for ASIAIR+. All works fine. Important to have RC51 at preliminary focus before installing the EAF. Hope this helps.
Likewise! Set to default.
I’m using a step size of 50 and get a nice curve fit from it. This is via NINA. I’m also overshooting by 250 steps and have no issues with backlash. That should be a good starting point at least.
Tom Dinneen:
I’m using a step size of 50 and get a nice curve fit from it. This is via NINA. I’m also overshooting by 250 steps and have no issues with backlash. That should be a good starting point at least.
Thanks , what camera are you using on your redcat .
Dave B:Tom Dinneen:
I’m using a step size of 50 and get a nice curve fit from it. This is via NINA. I’m also overshooting by 250 steps and have no issues with backlash. That should be a good starting point at least.
Thanks , what camera are you using on your redcat .
ASI294MM in bin 1 so 2.3 microns.