Pegasus Pocket Powerbox Micro - Comments wanted.

Works great for me. I use it to power my dew heater for my C8, my EQ6r-Pro, my cooled camera, and my mini pc. I guess through the PC's USB ports it also powers my EAF and guide camera too. I've never had any issues, and the most amps I've seen it draw at once is like 7 out of the rated 10 while slewing.

One thing I'm not sure about, but you might have to connect it to a PC at least one time to make sure the dew heaters are set to auto or whatever level you want.  The temp/humidity sensor seems to be pretty accurate as well. It matches my Acurite weather station pretty well.

On my setup, I have two Pegasus box with Asiair: Pegasus hub + Pegasus power box. I have met the same issue with the Asiair. 
Hence, the external power go to the Pegasus Power box and the Pegasus Power box supply all the setup: asiair, am5, cam, eaf, …
All the USB devices are connected to the Pegasus hub (supply by the Pegasus power)
The output of the Pegasus hub go to the Asiair or towards a computer (with NINA)
The Pegasus box are very good, I have use since several years without any issues
If you connect your setup to a computer, a specific soft exists in order to check the Pegasus data (Unity Platform).

Eric Gagne:

On my setup, I have two Pegasus box with Asiair: Pegasus hub + Pegasus power box. I have met the same issue with the Asiair. 
Hence, the external power go to the Pegasus Power box and the Pegasus Power box supply all the setup: asiair, am5, cam, eaf, ...
All the USB devices are connected to the Pegasus hub (supply by the Pegasus power)
The output of the Pegasus hub go to the Asiair or towards a computer (with NINA)
The Pegasus box are very good, I have use since several years without any issues
If you connect your setup to a computer, a specific soft exists in order to check the Pegasus data (Unity Platform).

I was planning on plugging the asiair and the powerbox separately to my battery pack but from this post I wonder, would the powerbox be able to power the dew heaters and the asiair on which the  camera, eaf, guide camera in the mount are connected ?

I like the idea of having only 1 cable going from the rig down to the battery pack but isn't that a lot of total power to draw from that small powerbox ?

Hello Eric, 
I was electronic engineer in the industry during 20 years, now I have got my village bakery.
My advice: connect only the Pegasus to the external power
Why?
In the Pegasus box, you have current & voltage protections: peaking, overshoot, temperature ... and so on
I am not sure that the input power stage of the Asiair is as strong design than the Pegasus one.
So, I prefer to protect my Asiair by power it through the Pegasus power box.

PS: the only advice about the Pegasus box is the input power slot, be careful to connect your external power to the good input because, on the other side of the Pegasus box, you have an output 12V/2A (I use it to power my mini computer MELE Q3). The input pin and this output pin are connected through a Powermos like a low resistance value. Hence, When you switch on, that's OK, but the current direction is not the good one. I have a friend that make this mistake, he sends his box to Pegasus for repair. Me, I have a power cable always connect to this input on the setup, no risk.