Hi, has anyone tried using the ASIAIR PRO and off axis guiding? I'll be buying a 12" RC (FL 2432 mm) so Iguider on CEM70G not ideal at all. Any pointers appreciated Ivan
Desktop.jpeg Desktop.jpeg two images from my Nikon 810a modified full frame DSLR. Both are shot with the Antlia tri-band filter, the Jellyfish is shot with the Skywatcher 82ed evostar with the reducer/flattener, the other is shot with the Celestron C...
Feb 9, 2025
Both posts discuss using ASIAIR equipment for astrophotography setup and guidance systems.
I noticed in the past few months, that I have to keep turning up the gain higher and higher on my guider camera. It's 3yrs old now, it's the asi120mm mini. First I thought the lens or the sensor were dirty, but I cleaned it and I get the same...
Nov 11, 2023
Both posts discuss technical issues related to guiding systems used in astrophotography setups.
I thought I'd reach out to see if anyone can share their PHD2 settings for this mount. I've had good success using my ASIAIR Pro but I'm in the process of transitioning to a Primaluce Eagle 6 running NINA. It's been a frustrating tran...
Jun 11, 2025
Both posts discuss technical challenges with astrophotography equipment setup and are seeking advice from the community about guiding systems and mount configurations.
Hello the setup i have used is - Star adventurer GTI - asiair mini - Svbony 165 and - Asi 120mm Mini but i had lot of issue during my first guide night my polar alignment was that: https://i.imgur.com/pDnzSNA.png but still lot of issue with the calib...
May 3, 2025
Both posts discuss technical challenges with using ASIAIR devices for astrophotography guiding systems.
Like a lot of folks I've been imaging strictly with refractors. Simple reason–astrophotography. is. hard. as. is. Put a camera on the business end of a refractor, done. Newts, of course, need collimation. Which, as a longtime visual observe...
May 20, 2025
Both posts discuss the technical challenges and equipment considerations involved in astrophotography setups.