Help required please has anyone had problems using their qhy290mm lately, running latest ascom drivers and latest all in one qhy drivers on a qhy5111-290mm , I can connect phd2 or sharpcap and camera recognised but seems once I connect all my other devices the qhy290mm jams up and stops responding which I’m assuming may be some sort of ascom problem so wondering if anyone else had this problem with a qhy camera and did they resolve it , running under windows 10 Pro .
Qhy290mm problem
I had some problems with driver for QHY268. Somebody told me to also include the driver for QHY5III series and that solved my problem.
You may try it.
Renan
You may try it.
Renan
Renan:
I had some problems with driver for QHY268. Somebody told me to also include the driver for QHY5III series and that solved my problem.
You may try it.
Renan
Thanks it’s the qhy5-111-290mm i’am using, trying to find which device is triggering the crash of camera at the moment .
Renan:
I had some problems with driver for QHY268. Somebody told me to also include the driver for QHY5III series and that solved my problem.
You may try it.
Renan
I had a similar issue with a ASI 120mm, turns out it was a bad USB hub.
Help Tracing Camera, Hardware, NINA or Driver Problem
I am recently having a problem where my camera will randomly stop writing to the hard drive, and I was hoping to get some input to help me trace this problem. So the issue is: Every few hours at relatively random times the camera will "apparentl...
Camera stops responding issue similar to QHY290MM jamming problem described.
About the calibration and usage of cameras with the Gsense 4040 sensor
Dear all, for almost exactly two years now we (Dr. Karl Remeis-Observatory Bamberg) are using a Moravian C4-16000 EC which houses the Gsense 4040 sensor from Gpixel for our university astronomy lab course and public outreach purposes. Initially we ha...
Camera sensor calibration and usage troubleshooting relevant to QHY camera issues.